Twinspark Racecar Rebuild

Giulia Super Engine Rebuild

These outlaw calipers were made with the correct mounting hole spacing for the Alfa 115, and the offset is pretty close to correct - only 3 mm off (about 1/8 inch). Although I had planned to make some spacers or brackets to adapt the calipers to the Alfa, I found that a set of cylinder head washers worked perfectly well, so I just used those. The caliper bolts are long enough that I did not feel the need to purchase longer bolts - but that's my professional judgment. Your opinion may differ, so don't take that as a recommendation. 

If you would like to purchase a set of these calipers, be sure to contact Andy Kress at Performatek (508-655-8079), e-mail aokress@comcast.net. Andy knows the specs on these calipers and can have the correct parts shipped out to you very fast. 

Outlaw had a look at a picture or two of this installation, and mentioned that "he thought the install was very nice looking" according to Andy.